15 49.0138 8.38624 arrow 1 bullet 1 6000 1 0 fade https://blog.thepoolfactory.com 300 4000 1
theme-sticky-logo-alt
America's Above Ground Pool Experts
Search
Generic filters
Exact matches only

How To Use the Winterizing Closing Kit For Chlorinated Or Saltwater Pools Up To 25,000 Gallons

This Winter Closing Kit contains everything you need to close your pool this fall. Follow these directions to make sure you are using the kit properly.
Print Friendly, PDF & Email

This Winter Closing Kit contains everything you need to close your pool this fall. Used to treat pools up to 25,000 gallons, it will condition the pool water and prevent algae growth throughout freezing winter months to ensure a sparkling clean pool. It is designed to care for your pool over the winter months when your pump and filter are not running to help ensure a trouble-free Spring opening.

Winterizing Closing Kit For Chlorinated Or Saltwater Pools Up To 25,000 Gallons

This winterizing kit includes the following:

  • 2lbs. of Winterizer – helps promote water clarity and quality during the inactive winter months
  • 2lbs. of Sequestering Agent – helps prevent hardness deposits and removes discoloring mineral stains from vinyl surfaces
  • 2lbs. of Winter Oxy Plus – removes contaminants to keep the water crystal clear.
Winterizing Closing Kit
EXPERT TIP: Your filter system should be operating when you are adding these winterizing chemicals to your swimming pool. This will ensure proper distribution.

Follow the steps below:

1

Dry Granulated Winterizer

  • Mix 2lbs of Dry Granulated Winterizer in a pail of water. The resulting mixture should be added evenly to the entire pool.
  • Run the filter system for at least 1-2 hours to ensure proper distribution.
2

Sequestering Compound

  • Add 2lbs of this product to a pail of hot water and stir until product is completely dissolved.
  • Pour the solution evenly around the entire perimeter of the pool.
  • Run the filter system for at least 1-2 hours to ensure proper distribution.
3

Winter Oxy Plus

  • Add 2lbs of this product directly into your pool.
  • Broadcast the required amount of this product uniformly over the surface of the pool water.
  • Run the filter system for at least 1-2 hours to ensure proper distribution.

You are now ready to proceed to the next steps for closing your swimming pool. For more information on closing your pool visit the Pool Closing section of our blog.

You can find some customer reviews here:

Shop at The Pool Factory