To open your above ground pool you will need the following pool supplies (see below). The following instructions below have been provided by The Pool Factory’s Above Ground Pool Experts.
Here are simple and easy to follow instructions for helping you prepare your swimming pool and chemically treat your swimming pool water for the upcoming season. These instructions apply to both above ground pools and semi inground pools.
Steps to Open your Swimming Pool
Step 1
Remove the swimming pool cover.
Step 2
Connect your filter system and Pool Frog Leap System to your swimming pool.
Step 3
Remove skimmer plate from the skimmer opening along the swimming pool wall and remove the winter plug from the pool return opening.
Step 4
Review the pool water level and add water to the swimming pool (if necessary).
Step 5
Perform a quick scrub of the inner pool walls as well as vacuum the swimming pool.
Step 6
Test the swimming pool’s water total Alkalinity Levels (adjust if necessary).
Step 7
Test the swimming pool’s water PH Level (adjust if necessary).
Step 8
Add a chlorine stabilizer at a rate of 1 LB per 5,000 gallons of pool water.
Step 9
Follow the instructions on your Pool Frog Leap Wake Up Pool Opening Kit which is an easy 3-step pool start-up program for optimal performance of the Pool Frog System.
Step 10
Insert a new Pool Frog Leap Anti-Bac Mineral Pac into the Infuzer. The mineral pac should be replaced every season or every 6 months.
Step 11
Insert a new Pool Frog Leap Torpedo Pac into the Infuzer.
About The Pool Factory
America’s Above Ground Pool Experts – is the best place to find everything you need to make owning a swimming pool or spa fun and easy, at the best prices today. With a combined 50+ years of experience The Pool Factory employs a highly trained staff of above ground and semi inground pool specialists. The Pool Factory can provide unique solutions for all pool supplies and swimming pool needs.