How To Identify
Your Saltwater LX Round Pool Components

Learn how to identify the different components of your Saltwater LX Round Pool.

How To Identify Your Saltwater LX Round Pool Components
Saltwater LX Round Pool Model

Saltwater LX Round Pool Model

Parts Breakdown

Identifying the parts of your swimming pool before the installation process will make the installation a lot easier and go more smoothly. Below you will find a breakdown of the parts that are used on our Saltwater LX Round Above Ground swimming pool and where they are used and installed.

Parts Breakdown Saltwater LX

Top Ledge – Index #F

Top Ledge for Round & Oval Curved Side of Saltwater LX Pool Models (56

Top Ledge

The Top Ledges (sometimes referred to as Top Rails) are the top finishing components of the swimming pool that are placed between the vertical upright posts. The Top Ledges are 8″ wide and are located at the very top of your pool.

Material: Injected-molded Resin

Ref #DescriptionPart # Length 12' 15' 18' 21'
FTop Ledge 10141350000 56" 810
12
14
Ref #DescriptionPart # Length 24' 27' 30' 33'
FTop Ledge 10141350000 56" 1618
20
22

Top Track – Index #A

Saltwater LX Top Track

Top Track

The Top Tracks (sometimes referred to as Inner Stabilizers) are the resin tracks that hold the liner onto the pool wall.

Material: Resin

Ref #DescriptionPart # Length 12' 15' 18' 21'
ATop Track 1071507160000 56" 810


1072407160000 56"
1214
Ref #DescriptionPart # Length 24' 27' 30' 33'
ATop Track1072407160000 56" 16


1073007160000 56"
182022

Top Caps – Index #G

Top Cap/Front Part for Saltwater LX Pools

Top Cap/Front Part

Top Cap/Back Part for Saltwater LX Pools

Top Cap/Back Part

The Top Caps consists of (2) parts. There is an Top Cap/Front Part which is closer to the outside of the pool. The Top Cap/Back Part is installed on the inside of the swimming pool closer to the water. The Top Caps cover all of the hardware where your Top Ledges screw into the Top Joiner Plates.

Ref #DescriptionPart # 12' 15' 18' 21'
GTop Cap/Front Part 10341350000 8 1012
14
GTop Cap/Back Part 10341350010 8 10
1214
Ref #DescriptionPart # 24' 27' 30' 33'
GTop Cap/Front Part 10341350000 161820
22
GTop Cap/Back Part 10341350010 1618
2022

Top Cap Cover Plate – Index #H

Top Cap Cover Plate for Saltwater LX Pool Models

Top Cap Cover Plate

The Top Cap Cover Plates cover where the Top Caps screw into the Top Joiner Plate.

Ref #DescriptionPart # 12' 15' 18' 21'
HTop Cap Cover Plate 10341350030 8 1012
14
Ref #DescriptionPart # 24' 27' 30' 33'
HTop Cap Cover Plate10341350030 161820
22

Top Joiner Plate – Index #I

Top Joiner Plate for Saltwater LX Pools

Top Joiner Plate

The Top Joiner Plates are screwed in at the top of every Upright. Your swimming pool’s Top Ledges will be screwed into these Top Joiner Plates.

Ref #DescriptionPart # 12' 15' 18' 21'
ITop Joiner Plate 11141350000 8 1012
14
Ref #DescriptionPart # 24' 27' 30' 33'
ITop Joiner Plate 11141350000 161820
22

Upright – Index #E

Upright for Round & Oval Curved Side Saltwater LX Pool Models

Curved Side Upright

The Uprights are the vertical posts on the outside of your swimming pool wall.

Ref #DescriptionPart # 12' 15' 18' 21'
EUpright 10243350004 8 1012
14
Ref #DescriptionPart # 24' 27' 30' 33'
EUpright 10243350004161820
22

Bottom Joiner Plate – Index #J

Bottom Joiner Plate/Upright Boot for Saltwater LX Pools

Bottom Joiner Plate

The Bottom Joiner Plates connect your Bottom Tracks together on a round pool. Your curved side uprights will also clip into the Bottom Joiner Plates.

Ref #DescriptionPart # 12' 15' 18' 21'
JBottom Joiner Plate 11241350000 8 1012
14
Ref #DescriptionPart # 24' 27' 30' 33'
JBottom Joiner Plate 11241350000161820
22

Bottom Track – Index #B

Saltwater LX Bottom Track

Bottom Track

The Bottom Track (sometimes referred to as Bottom Rail) is where your pool wall sits.

The Bottom Track inserts into the Bottom Joiner Plates.

Material: Resin

Ref #DescriptionPart # Length 12' 15' 18' 21'
BBottom Track 1081541000000 56" 810


1082441000000 56"
1214
Ref #DescriptionPart # Length 24' 27' 30' 33'
BBottom Track 1082441000000 56" 16


1083041000000 56"
182022

Coping Strips – Only Included with Overlap Liners

Coping For Overlap Liners - 2ft. Section

Coping Strips

Coping For Overlap Liners - 2ft. Section

Overlap Liner Installation Using Coping Strips

An Overlap Pool Liner is installed by overlapping it over the pool wall and using plastic Coping Strips to hold it in place. Coping Strips are not required when installing a Uni-Bead Liner or J-Hook Liner.

Click on the tab below to view the Manufacturer’s Installation and Safety Instructions for the Saltwater LX Round Swimming Pool.

SALTWATER LX ROUND INSTALLATION & SAFETY INSTRUCTIONS

Saltwater LX Replacement Parts

Need a replacement part? Shop our selection of Saltwater LX Pool Parts by clicking on the tab below:

Shop Products
Saltwater LX Replacement Parts