How To Identify
Your Quest Round Pool Components
Learn how to identify the different components of your Quest Round Pool.
Quest Round Pool Model
Parts Breakdown
Identifying the parts of your pool model before you begin your installation will make the process of assembling the swimming pool much easier. Below you will find a complete breakdown of the parts and components for the Quest Round Swimming Pool Model.
Top Ledge – Reference #6
Top Ledge
The Top Ledges (sometimes referred to as Top Rails) are the resin top finishing components of the swimming pool that are placed between the vertical upright posts. The Top Ledges are 8″ wide and are located at the very top of your pool.
Material: Resin
| Ref # | Description | Part # | Length | 15' |
|---|---|---|---|---|
| 6 | Top Ledge | 19233 | 55-13/16" | 10 |
| Ref # | Description | Part # | Length | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|
| 6 | Top Ledge | 19233 | 55-13/16" | 12 | 14 | 16 | 18 | 20 | 22 |
Top Track/ Inner Stabilizer – Reference #1
Top Track
The Top Track Stabilizers are the tracks/rails that stabilize the top of the pool wall.
Material: Aluminum
| Ref # | Description | Part # | Length | 15' |
|---|---|---|---|---|
| 1 | Top Track (Inner Stabilizer) | 10307 | 53-1/4" | 11 |
| Ref # | Description | Part # | Length | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Top Track (Inner Stabilizer) | 10308 | 54-1/8" | 13 | |||||
| 10309 | 54-7/16" | 15 | |||||||
| 10310 | 52-1/4" | 18 | |||||||
| 10311 | 52-7/8" | 20 | |||||||
| 19070 | 51-1/4" | 23 | |||||||
| 12269 | 53-3/8" | 24 |
Top Caps and Upright Collars – Reference #9 & #10
Top Cap
Upright Collar
The Top Cap consists of (2) parts. There is a Top Cap which goes over the Top Joiner Plates and the Upright Collar which is installed on the outside of the swimming pool. The Top Caps cover all of the hardware where your Top Ledges screw into the Top Joiner Plates.
| Ref # | Description | Part # | 15' | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|
| 9 | Top Cover | 19612 | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
| 10 | Upright Collar | 19613 | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
Screw Covers – Reference #11
Screw Covers
The Screw Covers are installed on the Upright Collars concealing the hardware.
| Ref # | Description | Part # | 15' | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|
| 11 | Screw Cover Left | 19765 | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
| 11 | Screw Cover Right | 19766 | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
Top Joiner Plates – Reference #3 & #13
Top Joiner Plate for Round & Oval Curved Side Uprights
The Top Joiner Plates are screwed in at the top of every Upright. Your swimming pool’s Top Ledges will be screwed into these Top Joiner Plates.
Material: Galvanized Steel
| Ref # | Description | Part # | 15' | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|
| 3 | Top Joiner Plate | 19164 | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
Uprights – Reference #5 & #14
Curved Side Upright
The Uprights are the vertical posts on the outside of your swimming pool wall. Each upright post connects to the bottom and top joiner plates with screws.
| Ref # | Description | Part # | 15' | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|
| 5 | Upright | 21509 | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
Bottom Joiner Plate – Reference #4
Bottom Joiner Plate
The Bottom Joiner Plates connect your Bottom Tracks together on a round pool and on the curved sides of an oval swimming pool. Your curved side uprights will also screw into the Bottom Joiner Plates.
Material: Resin
| Ref # | Description | Part # | 15' | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|
| 4 | Bottom Joiner Plate | 19092 | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
Upright Boot – Reference #8
Upright Boot
The Upright Boots are the decorative pieces that screw into the bottom of your Uprights.
| Ref # | Description | Part # | 15' | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|
| 8 | Upright Boot | 19615 | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
Coping Strips – Reference #7
Coping Strips
Overlap Liner Installation Using Coping Strips
An Overlap Pool Liner is installed by overlapping it over the pool wall and using plastic Coping Strips to hold it in place. Coping Strips are not required when installing a Uni-Bead Liner or J-Hook Liner, but they are included with the swimming pool. If using a Uni-Bead or J-Hook liner you can discard the coping strips.
| Ref # | Description | Part # | 15' | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|
| 7 | Coping Strips | 10296 | 12 | 14 | 16 | 19 | 21 | 24 | 25 |
Bottom Track – Reference #2
Bottom Track
The Bottom Track (sometimes referred to as Bottom Rail) is where your pool wall sits.
The Bottom Track inserts into the Upright Boots on the curved sides of the swimming pool and Straight Side Bottom Rail Connector on the straight sides.
Material: Resin
| Ref # | Description | Part # | Length | 15' |
|---|---|---|---|---|
| 2 | Bottom Rail | 12312 | 54-1/4" | 10 |
| Ref # | Description | Part # | Length | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|
| 2 | Bottom Rail | 12321 | 54-1/4" | 12 | |||||
| 12322 | 54-1/4" | 14 | |||||||
| 12323 | 54-1/4" | 16 | |||||||
| 12324 | 54-1/4" | 18 | |||||||
| 12325 | 54-1/4" | 20 | 22 |
Click on the tab below to view the Manufacturer’s Installation and Safety Instructions for the Quest Round Swimming Pool.
QUEST ROUND INSTALLATION & SAFETY INSTRUCTIONSQuest Replacement Parts
Need a replacement part? Shop our selection of Quest Pool Parts by clicking on the tab below:
Shop Products
