How To Identify
Your Melenia Oval Pool Components

Learn how to identify the different components of your Melenia Oval Pool.

Melenia Oval Pool Model

Parts Breakdown

Identifying the parts of your pool model before you begin your installation will make the process of assembling the swimming pool much easier. Below you will find a complete breakdown of the parts and components for the Melenia Oval Swimming Pool Model.

Top Ledge – Reference #6

Top Ledge

The Top Ledges (sometimes referred to as Top Rails) are the top finishing components of the swimming pool that are placed between the vertical upright posts. The Top Ledges are 7″ wide and are located at the very top of your pool.

Material: Krystal Kote Steel

Ref #	Description	Part #	Length	8'x12'	10'x16'	12'x18'	12'x20'	12'x24'
6	Top Ledge	22067	27-1/4"	10
		22037	40-1/8"		6	8	10	10
		22041	41-1/8"		2	2	6	8
		22034	30"	4
		22036	45-5/8"		4
		22035	47-1/4"			4

Ref #	Description	Part #	Length	15'x24'	15'x26'	15'x30'	18'x33'	18'x40'	21'x43'
6	Top Ledge	22037	40-1/8"
		22038	51-3/16"	10	10	10
		22039	51-15/16"				12	12
		22040	55-13/16"						14
		22041	41-1/4"	2	8	10	10	14	12
		22035	47-1/4"	4

Top Track/ Inner Stabilizer – Reference #1

Top Track

The Top Track Stabilizers are the tracks/rails that stabilize the top of the pool wall.

Material: Steel

Ref #	Description	Part #	Length	8'x12'	10'x16'	12'x18'	12'x20'	12'x24'
1	Top Track	38501	42-5/8"		6	8	10	10
		38515	29-1/2"	4
		38516	41-3/8"		4
		37391	27-1/4"
		38500	29-1/2"	10
		38512	33"		2	2	2	4
		38513	8"	2	4	4	4	6
		38514	43"			4
		22909	39"				4
		38511	37"					4

Ref #	Description	Part #	Length	15'x24'	15'x26'	15'x30'	18'x33'	18'x40'	21'x43'
1	Top Track	38501	42-5/8"
		38502	53-1/4"	10	10	10
		38503	54-1/8"				12	12
		38505	54-7/16"						14
		38512	33"	2	4	6	6	10	12
		38513	8"	4	6	8	8	12	14
		38514	43"	4
		38511	37"		4	4	4	4

Top Covers – Reference #9 & #10

Top Cover/Outer Cap

pool-supplies_replacement-parts-650x650-00005-dm_1125x1125.webp__PID:08fe6928-946e-44db-9881-1c5bf4b72628

Top Cover/Inner Cap

The Top Cover consists of (2) parts. There is an Outer Cap Top Cover which is closer to the outside of the pool. The Inner Cap Top Cover is installed on the inside of the swimming pool closer to the water. The Top Covers cover all of the hardware where your Top Ledges screw into the Top Joiner Plates.

Usually for oval shaped swimming pools there are (2) types of Outer Cap Top Covers. There are Outer Caps for the straight side and also the curved sides of the oval. They will differ slightly in shape as the straight side of an oval pool has different uprights than the curved sides and the cap must fit onto the upright.

Ref #	Description	Part #	8'x12'	10'x16'	12'x18'	12'x20'	12'x24'
9	Top Cover/Inner Cap	22049	14	12	14	16	18
10	Top Cover/Outer Cap - Straight Side	22048	2	4	4	4	6
10	Top Cover/Outer Cap - Curved Side	22047	12	8	10	12	12

Ref #	Description	Part #	15'x24'	15'x26'	15'x30'	18'x33'	18'x40'	21'x43'
9	Top Cover/Inner Cap	22049	16	18	20	22	26	26
10	Top Cover/Outer Cap - Straight Side	22048	4	6	8	8	12	14
10	Top Cover/Outer Cap - Curved Side	22047	12	12	12	14	14	12

Top Joiner Plates – Reference #3 & #13

Top Joiner Plate for Round & Oval Curved Side Cameo, Melenia, Heritage RTL & Signature RTL

Top Joiner Plate for Round & Oval Curved Side Uprights

Top Joiner Plate for Oval Straight Side Uprights

The Top Joiner Plates are screwed in at the top of every Upright. Your swimming pool’s Top Ledges will be screwed into these Top Joiner Plates.

For oval shaped swimming pools there are (2) types of Top Joiner Plates. There are Top Joiner Plates for the straight side and also the curved sides of the oval. They will differ slightly in shape as the straight side of an oval pool has different uprights than the curved sides and the Top Joiner plate must fit onto the top of the upright.

Ref #	Description	Part #	8'x12'	10'x16'	12'x18'	12'x20'	12'x24'
3	Top Joiner Plate Curved Side	22761	12	8	10	12	12
13	Top Joiner Plate Straight Side	22762	2	4	4	4	6

Ref #	Description	Part #	15'x24'	15'x26'	15'x30'	18'x33'	18'x40'	21'x43'
3	Top Joiner Plate Curved Side	22761	12	12	12	14	14	12
13	Top Joiner Plate Straight Side	22762	4	6	8	8	12	14

Uprights – Reference #5 & #14

melenia-upright-650x650-small-dm_1125x1125.webp__PID:6a716c38-25fb-47a3-a173-a4581ac9243a

Curved Side Upright

Straight Side Upright

The Uprights are the vertical posts on the outside of your swimming pool wall. Each upright post on the curved side of the swimming pool inserts into the bottom upright boot and connects to the top joiner plate with screws.

For oval shaped swimming pools there are (2) types of Uprights. There are Uprights for the straight side and also the curved sides of the oval. They will differ slightly in shape as the straight side of an oval pool has different uprights than the curved sides and the Top Joiner plate must fit onto the top of the upright.

Ref #	Description	Part #	8'x12'	10'x16'	12'x18'	12'x20'	12'x24'
5	Curved Side Uprights	22045	12	8	10	12	12
14	Straight Side Uprights	38838	2	4	4	4	6

Ref #	Description	Part #	15'x24'	15'x26'	15'x30'	18'x33'	18'x40'	21'x43'
5	Curved Side Uprights	22045	12	12	12	14	14	12
14	Straight Side Uprights	38838	4	6	8	8	12	14

Upright Boot – Reference #8

pool-supplies_replacement-parts-650x650-00031-dm_1125x1125.webp__PID:81c339a7-fcc7-47b9-af08-243e5d0a1a0e

Upright Boot

The Upright Boots connect your Bottom Tracks together on a round pool and on the curved sides of an oval swimming pool. Your curved side uprights will also clip into the Upright boots.

Ref #	Description	Part #	8'x12'	10'x16'	12'x18'	12'x20'	12'x24'
8	Upright Boots	22050	12	8	10	12	12

Ref #	Description	Part #	15'x24'	15'x26'	15'x30'	18'x33'	18'x40'	21'x43'
8	Upright Boots	22050	12	12	12	14	14	12

Coping Strips – Reference #7

Coping For Overlap Liners - 2ft. Section

Coping Strips

Overlap Liner Installation Using Coping Strips

An Overlap Pool Liner is installed by overlapping it over the pool wall and using plastic Coping Strips to hold it in place. Coping Strips are not required when installing a Uni-Bead Liner or J-Hook Liner, but they are included with the swimming pool. If using a Uni-Bead or J-Hook liner you can discard the coping strips.

Ref #	Description	Part #	Length	8'x12'	10'x16'	12'x18'	12'x20'	12'x24'
7	Coping Strips	10296	48"	9	12	14	15	16

Ref #	Description	Part #	Length	15'x24'	15'x26'	15'x30'	18'x33'	18'x40'	21'x43'
7	Coping Strips	10296	48"	19	19	19	21	24	28

Gussets – Reference #15 & #16

Left Side Gusset

Right Side Gusset

The Gussets consists of a Left side and a Right Side that are attached together at each straight side Upright.

Ref #	Description	Part #	8'x12'	10'x16'	12'x18'	12'x20'	12'x24'
15	Left Side Gusset	38562	2	4	4	4	6
16	Right Side Gusset	38563	2	4	4	4	6

Ref #	Description	Part #	15'x24'	15'x26'	15'x30'	18'x33'	18'x40'	21'x43'
15	Left Side Gusset	38562	4	6	8	8	12	14
16	Right Side Gusset	38563	4	6	8	8	12	14

Channel Supports – Reference #18 & #19

Top Channel Support Beam for Oval Wilbar & Saltwater Series Pool Models

Upper Oval Channel

Bottom Channel Support Beam for Oval Wilbar & Saltwater Series Pool Models

Under Ground Channel

The Upper (Top) Oval Channel and Under (Bottom) Ground Channel come together to form a tube. The Upper Oval Channel is longer than the Under Ground Channel and will extend past the Under Oval Channel towards the inside of the swimming pool.

The Gussets, Straight Side Uprights and Pressure Plates will be installed to these channels.

Ref #	Description	Part #	Length	8'x12'	10'x16'	12'x18'	12'x20'
18	Upper Oval Channel	27645	43-1/2"	2	4	4	4
19	Under Ground Channel	27646	35-9/16"	2	4	4	4

Ref #	Part #	Length	12'x24'	15'x24'	15'x26'	15'x30'	18'x33'	18'x40'	21'x43'
18	16539	52-3/8"	6	4	6	8	8	12	14
19	15933	45-9/16"	6	4	6	8	8	12	14

Pressure Plate – Reference #21

Pressure Plate

The Pressure Plates are corrugated steel plates that attach to the Upper Oval Channels and to each other.

Ref #	Description	Part #	8'x12'	10'x16'	12'x18'	12'x20'	12'x24'
21	Pressure Plate	16549	4	8	8	8	6

Ref #	Description	Part #	15'x24'	15'x26'	15'x30'	18'x33'	18'x40'	21'x43'
21	Pressure Plate	16549	4	6	8	8	12	14

Straight Side Bottom Rail Connector – Reference #17

Bottom Straight Side Track/Rail Connector for Oval Wilbar Pool Models

Connector Bottom Rail Straight Side

The Straight Side Bottom Rail Connector attaches to the Upper (Top) Oval Channel and is used to connect the straight side Bottom Tracks. The straight side Bottom Tracks will slide into the Connector on both sides.

Ref #	Description	Part #	8'x12'	10'x16'	12'x18'	12'x20'	12'x24'
17	Straight Side Bottom Rail Connector	16542	2	4	4	4	6

Ref #	Description	Part #	15'x24'	15'x26'	15'x30'	18'x33'	18'x40'	21'x43'
17	Straight Side Bottom Rail Connector	16542	4	6	8	8	12	14

Bottom Track – Reference #2

Bottom Track

The Bottom Track (sometimes referred to as Bottom Rail) is where your pool wall sits.

The Bottom Track inserts into the Upright Boots on the curved sides of the swimming pool and Straight Side Bottom Rail Connector on the straight sides.

Material: Steel

Ref #	Description	Part #	Length	8'x12'	10'x16'	12'x18'	12'x20'	12'x24'
2	Bottom Track	18837	25-1/4"	10				0
		27700	27-1/4"	4
		38736	38"		6	8		10
		10289	38"				10
		16713	37-1/2"		2	2	2	4
		38035	42-5/8"		4
		22901	45"			4
		16544	39"				4
		16714	39"					4

Ref #	Description	Part #	Length	15'x24'	15'x26'	15'x30'	18'x33'	18'x40'	21'x43'
2	Bottom Track	38736	38"
		14950	49"	10	10	10
		14949	50"				12	12
		38739	54-1/4"						10
		16713	37-1/2"	2	4	6	6	10	12
		22901	45"	4
		16714	39"		4	4	4	4
		26097	53-1/2"						4

Strap Section – Reference #22

Strap Section

The Strap Sections are connected to the Upper (Top) Oval Channels and lay flat across the width of our Oval Swimming Pools.

Ref #	Description	Part #	Length	8'x12'	10'x16'	12'x18'	12'x20'	12'x24'
22	Strap Section	33160	32-1/4"	1				0
		33095	28-5/8"		4
		16724	41-11/16"			4	4	6

Ref #	Description	Part #	Length	15'x24'	15'x26'	15'x30'	18'x33'	18'x40'	21'x43'
22	Strap Section	16724	41-11/16"
		16723	39-9/32"
		16725	40-11/16"	6	9	12
		16726	52-11/16"				12	18
		22126	48.984"						18

Oval Channel End Cap – Reference #23

Top Channel End Cap for Oval Wilbar & Saltwater Series Pool Models

Oval Channel End Cap

The Oval Channel End Cap is installed on the Upper (Top) Oval Channel and is used to prevent dirt and sand from entering the Channel.

Ref #	Description	Part #	8'x12'	10'x16'	12'x18'	12'x20'	12'x24'
23	Channel End Cap	22726	2	4	4	4	6

Ref #	Description	Part #	15'x24'	15'x26'	15'x30'	18'x33'	18'x40'	21'x43'
23	Channel End Cap	22726	4	6	8	8	12	14

3 Hole Square Washers – Reference #20

3 Hole Square Washers

The 3 Hole Square Washers are used in the pre-assembling of the straight sides of a buttress-free oval pool.

The 3 Hole Square Washers are installed on each side of the supports when joining the Gussets, Under Channel, Over Channel and Straight Side Uprights together.

Ref #	Description	Part #	8'x12'	10'x16'	12'x18'	12'x20'	12'x24'
20	3 Hole Square Washers	16663	4	8	8	8	12

Ref #	Description	Part #	15'x24'	15'x26'	15'x30'	18'x33'	18'x40'	21'x43'
20	3 Hole Square Washers	16663	8	12	16	16	24	28

Foam Block – Reference #24

Foam Block

The Foam Blocks are inserted into the Under (Bottom) Ground Channel. Foam Blocks are used to prevent sand from entering the Under (Bottom) Ground Channel.